Mirror Cutter for Thick Glass or Thin Glass Easy to Use for Beginner Or Pro Running Pliers Built into The Glass Cutters Tool with Glass Cutting Oil Instructions and Videos on How to Cut Glass Mirror
- PREPARE MIRROR CUTTER -Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run The Wheel Up And Down A Board, The Wheel Must Be Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Drags It Will Not Work. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Drag Across Glass And That Will Not Make a Good Score. Watch All Videos on Glass Cutter and Read All Included Tips And Instructions, Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique.
- HOW TO HOLD MIRROR CUTTING TOOL -Grips On Mirror Cutter Tool Are Only For Squeezing Mirror To Break And Should Not Be Used To Hold Glass Cutter When Scoring. Hold Close To The Wheel for Better Control And Pressure To Cutting Wheel, Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line Instead Of Shallow V, that Will Not Break On The Line. The Correct Mirror Score Must Be Just Hard Enough To Leave A Score Line On The Glass Mirror.
- CUT STRAIGHT LINE IN MIRROR - You Can Draw A Straight Line On The Mirror With A Marker And Simply Follow The Line With The Mirror Glass Cutter By Pulling Towards You And Looking At The Back Of The Mirror Cutting Wheel or Use Flat Side Of Glass Mirror Cutting Blade To Run Along Very Smooth Straight Edge Guide At Least 2mm Thick. Place Mirror Sheet On Board At Waist Height So You Can Use Mirror Glass Cutter Tool Like A Professional Glass Cutter. You May Need To Tape Guide To Prevent Moving.
- CUT CURVES IN MIRROR –Wavy Lines or Curves Up To Quarter Circle Can Be Cut In Mirrors If Tool is Held Correct And Instructions Followed Closely. Draw Line On Mirror And Follow The Line With The Mirror Cutting Tool. The Mirror Cutter Must Be Held Upright And Perpendicular, If You Lean Tool Over Sideways It Will Slide And Stop Glass Cutter From Working And Not Cut The Required V Cut In The Surface Of The Mirror Glass. Smooth curves can be with the Mirror Cutting Tool Sharp Angles Are Not Possible.
- BREAKING MIRROR - With Glass Cutter Align Aluminum Breaker Dead Center Over The Score Line, Lift Mirror and Squeeze Grips Gently At End Of Handles. For Large Mirror Sheet A Straight Piece Of Wood Can Be Placed Under The Score Line And Mirror Bent Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edges, Less May Be Possible But Only With Practice.
- Color: 2.Pink Right Handed
- Manufacturer: The Amazing Tile And Glass Cutter
- Model Number: GCPK
- Package Quantity: 1
- Part Number: GCPK
- Size: A. Glass Cutter Kit
Mirror Cutting Tool Kit – Not Just Any Mirror Cutter The Amazing Glass Cutter Made In Uk A Manual Glass Mirror Cutter That Lets You Cut Straight Radius And Wavy Lines In Mirror Glass Stained Glass And Glass Tiles. The Scoring Wheel Is Not Sharp, It Is Likely The Dullest Tool You Will Own But The Hardest, This Hardness Along With The Special Angle Ground Into The Mirror Scoring Wheel Allows The Amazing Glass Cutter To Cut Thick Mirror And Cut Thin Mirror And Glass Materials And Hard Tile Without Hurting The Wheel. The Secret Is To Follow The Instructions Exactly. Practice On A Spare Piece In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Give Uneven Pressure Along The Score Line And May Even Crack The Mirror Before You Start. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely May Cause The Wheel To Bind, Drag And Even Lock Up And Just Scratch The Glass Instead Of Evenly Scoring It And This Will Prevent The Mirror Cutter From Working Correctly. Holding The Mirror Cutting Tool By The Plastic Grips When Scoring With Your Strongest Hand Means That You Are Only Applying Minimal Amount Of Pressure If Any On The Cutting Wheel At The Point Where The Scoring Is Happening. Always Pull Towards You Not Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Down Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Can Wipe The Oil Off The Glass And There Is No Score Line Visible, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
- PREPARE MIRROR CUTTER -Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run The Wheel Up And Down A Board, The Wheel Must Be Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Drags It Will Not Work. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Drag Across Glass And That Will Not Make a Good Score. Watch All Videos on Glass Cutter and Read All Included Tips And Instructions, Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique.
- HOW TO HOLD MIRROR CUTTING TOOL -Grips On Mirror Cutter Tool Are Only For Squeezing Mirror To Break And Should Not Be Used To Hold Glass Cutter When Scoring. Hold Close To The Wheel for Better Control And Pressure To Cutting Wheel, Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line Instead Of Shallow V, that Will Not Break On The Line. The Correct Mirror Score Must Be Just Hard Enough To Leave A Score Line On The Glass Mirror.
- CUT STRAIGHT LINE IN MIRROR - You Can Draw A Straight Line On The Mirror With A Marker And Simply Follow The Line With The Mirror Glass Cutter By Pulling Towards You And Looking At The Back Of The Mirror Cutting Wheel or Use Flat Side Of Glass Mirror Cutting Blade To Run Along Very Smooth Straight Edge Guide At Least 2mm Thick. Place Mirror Sheet On Board At Waist Height So You Can Use Mirror Glass Cutter Tool Like A Professional Glass Cutter. You May Need To Tape Guide To Prevent Moving.
- CUT CURVES IN MIRROR –Wavy Lines or Curves Up To Quarter Circle Can Be Cut In Mirrors If Tool is Held Correct And Instructions Followed Closely. Draw Line On Mirror And Follow The Line With The Mirror Cutting Tool. The Mirror Cutter Must Be Held Upright And Perpendicular, If You Lean Tool Over Sideways It Will Slide And Stop Glass Cutter From Working And Not Cut The Required V Cut In The Surface Of The Mirror Glass. Smooth curves can be with the Mirror Cutting Tool Sharp Angles Are Not Possible.
- BREAKING MIRROR - With Glass Cutter Align Aluminum Breaker Dead Center Over The Score Line, Lift Mirror and Squeeze Grips Gently At End Of Handles. For Large Mirror Sheet A Straight Piece Of Wood Can Be Placed Under The Score Line And Mirror Bent Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edges, Less May Be Possible But Only With Practice.
- Color: 2.Pink Right Handed
- Manufacturer: The Amazing Tile And Glass Cutter
- Model Number: GCPK
- Package Quantity: 1
- Part Number: GCPK
- Size: A. Glass Cutter Kit
Mirror Cutting Tool Kit – Not Just Any Mirror Cutter The Amazing Glass Cutter Made In Uk A Manual Glass Mirror Cutter That Lets You Cut Straight Radius And Wavy Lines In Mirror Glass Stained Glass And Glass Tiles. The Scoring Wheel Is Not Sharp, It Is Likely The Dullest Tool You Will Own But The Hardest, This Hardness Along With The Special Angle Ground Into The Mirror Scoring Wheel Allows The Amazing Glass Cutter To Cut Thick Mirror And Cut Thin Mirror And Glass Materials And Hard Tile Without Hurting The Wheel. The Secret Is To Follow The Instructions Exactly. Practice On A Spare Piece In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Give Uneven Pressure Along The Score Line And May Even Crack The Mirror Before You Start. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely May Cause The Wheel To Bind, Drag And Even Lock Up And Just Scratch The Glass Instead Of Evenly Scoring It And This Will Prevent The Mirror Cutter From Working Correctly. Holding The Mirror Cutting Tool By The Plastic Grips When Scoring With Your Strongest Hand Means That You Are Only Applying Minimal Amount Of Pressure If Any On The Cutting Wheel At The Point Where The Scoring Is Happening. Always Pull Towards You Not Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Down Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Can Wipe The Oil Off The Glass And There Is No Score Line Visible, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
Oops!
Sorry, it looks like some products are not available in selected quantity.