Mangrove Products: Boat Transom Saver, Outboard Motor Support, Single Ram Wedge, Boat Accessories, Transom Savers for Outboard Motor, Boat Motor Engine Support, Boat Saver, Pontoon Boat Accessories
- ✅UNIVERSAL FITMENT: Supports outboard motor brands such as Yamaha, Mercury, Suzuki, Evinrude, Honda, and Tohatsu. Specific Fitment range for outboards with single ram hydraulic tilt systems (See Fitment Guide). The intended use is to support and brace the outboard motor when trailering to prevent any unwanted motor travel up and down when trailering, This unwanted movement can put damaging pressure to the tilt and trim unit's hydraulic system and boat transom without using wedge/block support.
- ✅EASY TO USE: No drilling or special installation required, no need to bend over or get on your knees. Eliminate metal to skeg scrapping compared to metal transom savers. Simply tilt engine up, insert high pressure wedge into Tilt Ram piston, then tilt down and you are on your way. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, skeg support, or brackets. All you need is the high pressure wedge.
- ✅UPGRADED DESIGN/HIGH PRESSURE SYSTEM: High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Compression testing over 2000 lbs of pressure (Updated), extended wedge length to aid in higher skeg ride height, withstand extreme hot/cold temps under compression, 10 inner notches for secure connection to tilt shaft, colored visual surface, and ergonomic design for storage in dry box. Pressure between the wedge and tilt/trim unit will not damage the wedge unit.
- ✅SIMPLIFY BOATING: Make your life easier and more enjoyable by eliminating the worry of potential damage to your outboard motor or transom when trailering your boat to your favorite fishing spot with the family, so you can focus on the fun. Wedge/Block can reduce strain to transom when hitting bumps on roadway. NOTE: Compression will flex the rubber wedge which is a normal process. The high pressure EPDM wedge creates a barrier of support to prevent damage to transom and tilt/trim unit.
- ✅FITMENT GUIDE: (Update) Yamaha 4-Stroke/2-Stroke: 30hp-200hp, VMAX-SHO 90hp-175hp (1 block) Mercury (ProXS, 4-Stroke, 2-Stroke) 40hp-175hp, Verado (V8+V6) 250hp-400hp (2 blocks), Mercury Racing 300R-450R (2 blocks) + 60R, Suzuki 40hp-200hp (1 block), Tohatsu 40hp-150hp (1 block), Honda 40hp-150hp (1 block), Evinrude E-Tech (H.O.+ Inline) 25hp-130hp (1 block). Make sure to attach to Single Ram Piston. A premium product for your premium engine. A boat accessory that will last.
- Color: Black
- Manufacturer: Mangrove Products
- Model Number: 2148
- Style: Black (1 Pack)
Mangrove Products is a small business owned by avid boating, fishing, and outdoor enthusiasts. Our goal in creating marine products that benefit boaters. Most boats of all sizes are actively using an outboard motor. We want to ensure save trailering for your boat(s) main source of power to prevent possible issues further down the line. Our high-pressure support wedge provides this action for both safety and outboard motor support when trailering for short and long distances. Re-constructed technology giving higher pressure rating that competition and better universal fitment to the tilt and trim shaft. Before purchase, please ensure fitment for your outboard as listed above. Note the high pressure wedge acts as a shock absorber mount and stabilizer to both your hydraulic tilt/trim system as well as your transom by the action to secure and stop upward and downward momentum of your motor resulting from bumps, potholes, dirt roads, debris, curbs etc. when trailering on the road. Mount wedge/holder to tilt bracket/metal arm.Directions for Best Fitment: Lift your tilt and trim to upward position. When inserting wedge, we recommend to face flat side (With Mangrove Products Logo) facing either port (left) OR starboard (right) facing position. When inserted then tilt your outboard to downward position until there is minimal travel down confirming that wedge is in place.Boating Tips: Make sure to turn batteries off before trailering to and from to ensure no complications of trim moving upward and losing pressure contact between outboard and wedge. Ensure that your skeg is free of any contact to the ground prior to trailering boat.Boat Type Applications: Bass Boats, Pontoon Boats, Bay Boats, Flats Boats, Jon Boats, Center Consoles, and Micro Skiffs.Gift Idea: Boat Accessories Gifts for Men, Pontoon Boat Gifts, Boating Gifts, Boat Accessories, Pontoon Boat Accessories, Boating Gifts for men, Boating must haves, Boating Gift
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
- ✅UNIVERSAL FITMENT: Supports outboard motor brands such as Yamaha, Mercury, Suzuki, Evinrude, Honda, and Tohatsu. Specific Fitment range for outboards with single ram hydraulic tilt systems (See Fitment Guide). The intended use is to support and brace the outboard motor when trailering to prevent any unwanted motor travel up and down when trailering, This unwanted movement can put damaging pressure to the tilt and trim unit's hydraulic system and boat transom without using wedge/block support.
- ✅EASY TO USE: No drilling or special installation required, no need to bend over or get on your knees. Eliminate metal to skeg scrapping compared to metal transom savers. Simply tilt engine up, insert high pressure wedge into Tilt Ram piston, then tilt down and you are on your way. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, skeg support, or brackets. All you need is the high pressure wedge.
- ✅UPGRADED DESIGN/HIGH PRESSURE SYSTEM: High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Compression testing over 2000 lbs of pressure (Updated), extended wedge length to aid in higher skeg ride height, withstand extreme hot/cold temps under compression, 10 inner notches for secure connection to tilt shaft, colored visual surface, and ergonomic design for storage in dry box. Pressure between the wedge and tilt/trim unit will not damage the wedge unit.
- ✅SIMPLIFY BOATING: Make your life easier and more enjoyable by eliminating the worry of potential damage to your outboard motor or transom when trailering your boat to your favorite fishing spot with the family, so you can focus on the fun. Wedge/Block can reduce strain to transom when hitting bumps on roadway. NOTE: Compression will flex the rubber wedge which is a normal process. The high pressure EPDM wedge creates a barrier of support to prevent damage to transom and tilt/trim unit.
- ✅FITMENT GUIDE: (Update) Yamaha 4-Stroke/2-Stroke: 30hp-200hp, VMAX-SHO 90hp-175hp (1 block) Mercury (ProXS, 4-Stroke, 2-Stroke) 40hp-175hp, Verado (V8+V6) 250hp-400hp (2 blocks), Mercury Racing 300R-450R (2 blocks) + 60R, Suzuki 40hp-200hp (1 block), Tohatsu 40hp-150hp (1 block), Honda 40hp-150hp (1 block), Evinrude E-Tech (H.O.+ Inline) 25hp-130hp (1 block). Make sure to attach to Single Ram Piston. A premium product for your premium engine. A boat accessory that will last.
- Color: Black
- Manufacturer: Mangrove Products
- Model Number: 2148
- Style: Black (1 Pack)
Mangrove Products is a small business owned by avid boating, fishing, and outdoor enthusiasts. Our goal in creating marine products that benefit boaters. Most boats of all sizes are actively using an outboard motor. We want to ensure save trailering for your boat(s) main source of power to prevent possible issues further down the line. Our high-pressure support wedge provides this action for both safety and outboard motor support when trailering for short and long distances. Re-constructed technology giving higher pressure rating that competition and better universal fitment to the tilt and trim shaft. Before purchase, please ensure fitment for your outboard as listed above. Note the high pressure wedge acts as a shock absorber mount and stabilizer to both your hydraulic tilt/trim system as well as your transom by the action to secure and stop upward and downward momentum of your motor resulting from bumps, potholes, dirt roads, debris, curbs etc. when trailering on the road. Mount wedge/holder to tilt bracket/metal arm.Directions for Best Fitment: Lift your tilt and trim to upward position. When inserting wedge, we recommend to face flat side (With Mangrove Products Logo) facing either port (left) OR starboard (right) facing position. When inserted then tilt your outboard to downward position until there is minimal travel down confirming that wedge is in place.Boating Tips: Make sure to turn batteries off before trailering to and from to ensure no complications of trim moving upward and losing pressure contact between outboard and wedge. Ensure that your skeg is free of any contact to the ground prior to trailering boat.Boat Type Applications: Bass Boats, Pontoon Boats, Bay Boats, Flats Boats, Jon Boats, Center Consoles, and Micro Skiffs.Gift Idea: Boat Accessories Gifts for Men, Pontoon Boat Gifts, Boating Gifts, Boat Accessories, Pontoon Boat Accessories, Boating Gifts for men, Boating must haves, Boating Gift
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
Oops!
Sorry, it looks like some products are not available in selected quantity.