Embroidex Cap/Hat Hoop for Brother Embroidery Machine SE270D HE-120 900D HE-240 LB6770 SE400 LB6800PRW LB6800THRD 950D PE-450 PE500 HE1 SB7050E Simplicity SB7500 SE425 Innov-is 990D PE540D PE525 HE300
- ★ If you want to personalize caps and hats with designs such as logos, initials, names, you’ll need a cap hoop. The cap hoop attaches to your regular 4×4 inch hoop and holds the bill of the cap firmly in a clamp outside of the embroidery frame. The cap itself is attached to the hoop with adhesive stabilizer.
- ★ This Cap Hoop clamps to 4×4 inch embroidery hoops and will work with the Brother SE400, SE350, SE270D, HE120, HE240, Innovis 500D, Innovis 900D, Innovis 950D, LB6770PRW, LB6800PRW Embroidery Machines.
- ★ SE270D, PE-300S, HE-120, Innov-ís 900D, SE350, HE-240, LB6770, LB6770 PRW, SE400, LB6800PRW, LB6800THRD, Innov-ís 950D, PE-450, PE500, HE1, Simplicity SB7050E, Simplicity SB7500, SE425, Innov-is 990D, PE540D, PE525, HE300
- Manufacturer: Embroidex
- Model Number: 4336934073
- Package Quantity: 1
- Part Number: caphoopSe270d
How To Embroider A Cap With This Hoop Cut a piece of adhesive stabilizer slightly larger than the cap hoop frame and pull the backing off. Stick the stabilizer to the bottom frame of the cap hoop. Try wrapping the stabilizer around the edges of the cap hoop, if it doesn’t stick tightly enough. Using a water-soluble pen, mark the center of the design on the cap. Loosen the back strap on the cap. Unscrew the thumbscrew on the hoop clamp to and slide the cap bill under the clamp. Using the markings you made on the cap and the template grid, arrange the cap so that the center of the design aligns with the center of the hoop. Before you tighten the clamp, make sure the sweatband and backing are pulled away from the embroidery area so that you don’t stitch it to the cap. You may have to tape or pin the sweatband to keep it out of the way. The buckram (stiff backing) under the sweatband also has to be pulled back. If necessary to pull it back neatly, cut the buckram an inch or two where it is stitched to the cap bill on each side. Tighten the clamp with the thumbscrew. Starting in the middle and working out to the edges, press the cap down firmly against the adhesive stabilizer. The cap must be as flat and smooth as possible. Clamp the cap hoop to the regular 4×4 inch hoop on the side opposite where it attaches to the embroidery unit. Turn the SE400 on and set it up for embroidery as usual. Turn the embroidery unit on and attach the regular 4×4 inch hoop with the cap hoop attached. You may have to remove the foot and/or shank to do this. Use the curser keys to center the needle and begin to embroider your design onto the cap. Remember, the design must be rotated clockwise a quarter turn because the cap is hooped sideways and you want the design vertical.
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
- ★ If you want to personalize caps and hats with designs such as logos, initials, names, you’ll need a cap hoop. The cap hoop attaches to your regular 4×4 inch hoop and holds the bill of the cap firmly in a clamp outside of the embroidery frame. The cap itself is attached to the hoop with adhesive stabilizer.
- ★ This Cap Hoop clamps to 4×4 inch embroidery hoops and will work with the Brother SE400, SE350, SE270D, HE120, HE240, Innovis 500D, Innovis 900D, Innovis 950D, LB6770PRW, LB6800PRW Embroidery Machines.
- ★ SE270D, PE-300S, HE-120, Innov-ís 900D, SE350, HE-240, LB6770, LB6770 PRW, SE400, LB6800PRW, LB6800THRD, Innov-ís 950D, PE-450, PE500, HE1, Simplicity SB7050E, Simplicity SB7500, SE425, Innov-is 990D, PE540D, PE525, HE300
- Manufacturer: Embroidex
- Model Number: 4336934073
- Package Quantity: 1
- Part Number: caphoopSe270d
How To Embroider A Cap With This Hoop Cut a piece of adhesive stabilizer slightly larger than the cap hoop frame and pull the backing off. Stick the stabilizer to the bottom frame of the cap hoop. Try wrapping the stabilizer around the edges of the cap hoop, if it doesn’t stick tightly enough. Using a water-soluble pen, mark the center of the design on the cap. Loosen the back strap on the cap. Unscrew the thumbscrew on the hoop clamp to and slide the cap bill under the clamp. Using the markings you made on the cap and the template grid, arrange the cap so that the center of the design aligns with the center of the hoop. Before you tighten the clamp, make sure the sweatband and backing are pulled away from the embroidery area so that you don’t stitch it to the cap. You may have to tape or pin the sweatband to keep it out of the way. The buckram (stiff backing) under the sweatband also has to be pulled back. If necessary to pull it back neatly, cut the buckram an inch or two where it is stitched to the cap bill on each side. Tighten the clamp with the thumbscrew. Starting in the middle and working out to the edges, press the cap down firmly against the adhesive stabilizer. The cap must be as flat and smooth as possible. Clamp the cap hoop to the regular 4×4 inch hoop on the side opposite where it attaches to the embroidery unit. Turn the SE400 on and set it up for embroidery as usual. Turn the embroidery unit on and attach the regular 4×4 inch hoop with the cap hoop attached. You may have to remove the foot and/or shank to do this. Use the curser keys to center the needle and begin to embroider your design onto the cap. Remember, the design must be rotated clockwise a quarter turn because the cap is hooped sideways and you want the design vertical.
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
Oops!
Sorry, it looks like some products are not available in selected quantity.