DC 12V 1A Automatic PC CPU Fan Temperature Control Speed Controller Case Fan Speed Governor with Sensor for 2 3 4 Wire Fan
- This DC12V governor can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, saving energy and reducing noise.
- Whether it is a 2-wire, 3-wire or 4-wire fan (only connect power cable), whether PWM or brushless fans, as long as the fan voltage is within 12V, current less than 1A, the governor apply! Also can drive a of fans (total current must<1A). 【3-wire/4-wire fans only need to connect the fan's power cord to the controller】
- The temperature sensor is connected with a cable in the form of mounting holes to facilitate detection of the temperature specified temperature point. Temperature probe is sealed with epoxy resin, waterproof and moisture-proof, the temperature probe maximum use temperature of 110 degrees. Sensor probe length: 300mm/11.5inch.
- Dual working mode optional, fixed starting temperature or adjustable starting temperature. Fixed mode temperature and temperature of 30°C(86°F), the governor control fan start, 30 to 50 degrees fan speed linear increase, 50°C(122°F ) above the fan at full speed. Adjustable mode start-up temperature range: 15 to 50 degrees, full speed range of 35 to 70 degrees (start and full-speed temperature difference of 20 degrees).
- Board size: 1.77x1.0x1.18inch/ 45x25x30mm (LXWXH), M3 mounting hole. ( Note that It is best to read the main picture instructions before use)
- Color: Blue
- Manufacturer: QINIZX
- Model Number: Speed-Controller-12V-1A
- Package Quantity: 1
- Part Number: Speed-Controller-12V
- Size: 1.77x1.0x1.18inch
- Style: DC12V 1A
This DC12V governor can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, the ambient temperature is below the set the start temperature, the governor can control the fan stops running, in order to save power and eliminate unwanted noise generated by the fan. Variety of 2, 3, 4-wire 12V fans are applicable. Features: 1. With power anti-reverse protection, power line reversed, the board will not burn. 2. New dual-mode function: fixed temperature mode and adjustable temperature mode. 3. Fit for 2,3,4 wire 12V fan, stepless temperature control can be achieved. 4. Single temperature sensor, easier to use, more responsive control. 5. On board there is a Mode Switch, the switch to the F position, the governor fixed temperature mode (The onboard potentiometer is useless); switch to the A position, the governor of temperature adjustable mode. 6. When the Mode Switch is in A position, the temperature adjustment potentiometer can use it, rotating the potentiometer, you can change the fan-start temperature. 7. Fixed mode temperature at 30 degrees, the fan speed control starts from 30 to 50 degrees fan speed linear increase, 50 degrees fan at full speed. 8. Adjustable mode start temperature range: 15 to 50 degrees, the full speed range of 35 to 70 degrees (start-up and full of temperature difference of 20 degrees). 9. The temperature sensor has a fixed head, sealed with epoxy resin, waterproof and moisture-proof, the default cable length is 300mm, and it can also be extended with a cable by yourself. The maximum operating temperature of the temperature probe is 110 degrees, exceeding this temperature, the probe will be damaged! 10. Board overall size: 1.77x1.0x1.18inch (LXWXH). M3 mounting hole. Package Included: 1x Speed Controller with Sensor Probe
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
- This DC12V governor can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, saving energy and reducing noise.
- Whether it is a 2-wire, 3-wire or 4-wire fan (only connect power cable), whether PWM or brushless fans, as long as the fan voltage is within 12V, current less than 1A, the governor apply! Also can drive a of fans (total current must<1A). 【3-wire/4-wire fans only need to connect the fan's power cord to the controller】
- The temperature sensor is connected with a cable in the form of mounting holes to facilitate detection of the temperature specified temperature point. Temperature probe is sealed with epoxy resin, waterproof and moisture-proof, the temperature probe maximum use temperature of 110 degrees. Sensor probe length: 300mm/11.5inch.
- Dual working mode optional, fixed starting temperature or adjustable starting temperature. Fixed mode temperature and temperature of 30°C(86°F), the governor control fan start, 30 to 50 degrees fan speed linear increase, 50°C(122°F ) above the fan at full speed. Adjustable mode start-up temperature range: 15 to 50 degrees, full speed range of 35 to 70 degrees (start and full-speed temperature difference of 20 degrees).
- Board size: 1.77x1.0x1.18inch/ 45x25x30mm (LXWXH), M3 mounting hole. ( Note that It is best to read the main picture instructions before use)
- Color: Blue
- Manufacturer: QINIZX
- Model Number: Speed-Controller-12V-1A
- Package Quantity: 1
- Part Number: Speed-Controller-12V
- Size: 1.77x1.0x1.18inch
- Style: DC12V 1A
This DC12V governor can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, the ambient temperature is below the set the start temperature, the governor can control the fan stops running, in order to save power and eliminate unwanted noise generated by the fan. Variety of 2, 3, 4-wire 12V fans are applicable. Features: 1. With power anti-reverse protection, power line reversed, the board will not burn. 2. New dual-mode function: fixed temperature mode and adjustable temperature mode. 3. Fit for 2,3,4 wire 12V fan, stepless temperature control can be achieved. 4. Single temperature sensor, easier to use, more responsive control. 5. On board there is a Mode Switch, the switch to the F position, the governor fixed temperature mode (The onboard potentiometer is useless); switch to the A position, the governor of temperature adjustable mode. 6. When the Mode Switch is in A position, the temperature adjustment potentiometer can use it, rotating the potentiometer, you can change the fan-start temperature. 7. Fixed mode temperature at 30 degrees, the fan speed control starts from 30 to 50 degrees fan speed linear increase, 50 degrees fan at full speed. 8. Adjustable mode start temperature range: 15 to 50 degrees, the full speed range of 35 to 70 degrees (start-up and full of temperature difference of 20 degrees). 9. The temperature sensor has a fixed head, sealed with epoxy resin, waterproof and moisture-proof, the default cable length is 300mm, and it can also be extended with a cable by yourself. The maximum operating temperature of the temperature probe is 110 degrees, exceeding this temperature, the probe will be damaged! 10. Board overall size: 1.77x1.0x1.18inch (LXWXH). M3 mounting hole. Package Included: 1x Speed Controller with Sensor Probe
Shipping Summary:
-
=> Standard International Shipping from the United States to Canada costs CAD 9.99.
-
=> Orders are processed within 1-3 business days (excluding weekends and holidays).
-
=> Once your order ships, you will receive a confirmation email with tracking details.
Shipping Time:
-
=> Standard International Shipping: Estimated 10-15 business days within Canada.
-
=> Shipping times are estimates and may be affected by external factors such as weather, holidays, or customs delays.
-
=> We do not guarantee exact delivery dates, as delays may occur due to the shipping carrier.
Tracking Your Order:
-
=> A tracking number will be provided once your order ships.
-
=> Orders may be shipped from different fulfillment centers worldwide to ensure quality and affordability.
Delivery Conditions:
-
=> Shipments are delivered to most addresses, except P.O. Boxes.
-
=> In certain remote areas, additional delivery charges may apply, or you may need to pick up your package from the nearest service location of our shipping partner.
Order Modifications:
If you need to cancel or modify your order, please contact our customer support immediately.
Issues with Delivery:
If your order shows as delivered but you have not received it, please contact the shipping carrier directly to resolve the issue. For persistent problems, contact our customer service at cs@everymarket.ca.
Customer Support:
Our team is available 24/7 to assist you with any questions or concerns regarding your order. We are committed to ensuring a smooth shopping experience.
Return Policy
-
=> Duration: You have 30 days from receiving your item to initiate a return.
-
=> Condition: Items must be unworn, unwashed, with original tags and packaging intact.
-
=> Shipping Costs: Customers are responsible for return shipping costs.
-
=> Packaging: Ensure returned items are well-packaged to avoid damage during transit.
-
=> Tracking: Use a trackable and insured shipping method as we are not liable for items lost or damaged on return.
-
=> Initiating a Return: Contact us at cs@everymarket.ca to start your return. We will provide a return shipping label and instructions upon approval. Returns without prior approval will not be accepted.
How to Return
-
=> Method: Returns must be sent back by mail to the address provided in the return instructions.
Return Label
-
=> Defective Products: Return labels are provided for defective items.
-
=> Non-Defective Returns: Customers are responsible for obtaining their return shipping label.
Product Conditions for Return
-
=> Eligible Products: Returns are only accepted for items in new condition.
Non-returnable Items
-
Certain items are not eligible for return:
-
=> Electronic devices after 30 days (e.g., computers, laptops, Kindles).
-
=> Gift cards, prepaid game cards.
-
=> Perishable goods, live insects, some jewelry, some health and personal care items.
-
=> Customized or personalized products.
-
=> Items with special shipping restrictions.
-
Refund Policy
-
=> Window: Eligible products may be returned within 30 days of delivery for a refund.
-
=> Refund Method: Refunds are processed to the original payment method or as store credit for items purchased with gift cards.
-
=> Processing Time: Refunds are processed within 3-5 business days after we receive the return; please allow additional time for shipping and bank processing.
Claims
-
=> Inspect your order upon arrival and report any defects, damages, or incorrect items immediately to allow us to address the issue.
-
=> For claims, contact our support team with details of the issue.
Exchange Policy
-
=> For the quickest service, return your original item and place a new order for the desired product once your return is accepted.
For any further inquiries, feel free to contact our customer support team at cs@everymarket.ca
Oops!
Sorry, it looks like some products are not available in selected quantity.